The Sycamore Gap Tree prints: Heartwood Exhibition
Share
"I felt privileged to be commissioned by the National Trust to print Sycamore Gap, and I also felt a responsibility to do my best so that I could honour not only the tree itself but all the people who loved the tree too. As a north easterner I have known Sycamore Gap all my life and visited regularly, the tree was such a haven in the wild landscape. Now that the series of prints are complete, I am pleased and proud of my work. It's a testament to the tree, to the life of that tree and the lives of other trees to see, to work with it, to see its life, to appreciate it."
The Heartwood exhibition ran from 15th July 2024 until the 2nd March 2025 having been exhibited along Hadrians Wall; The Queens Hall, Hexham, The Baltic, Gateshead. In Autumn 2025 it was in the Great North Museum, and in April 2026 at Seaton Delaval Hall.
One of the prints is on permanent display at Housesteads Visitor centre on Hadrians Wall.
When I heard on the news that the tree had been felled, I felt so shocked and saddened. I didn't think about printing the tree until much later. I was contacted by a few people who asked me if I was going to print a round from the tree and I also noticed that the National Trust were gathering emails and responses from people who had loved the tree and were suggesting what could be done to commemorate it's life. I emailed the Trust to offer a print for a possible exhibition.
I print trees as it gives me a way to feel close to their lives and also reveals in visual form the mystery and love I have for them. I usually print rounds from trees that are fairly anonymous in the landscape, the ones easily passed by and in some ways to me this feels particularly special.
I was really pleased to be able to print Sycamore gap as part of it's legacy because I want to show and share the natural beauty of the tree itself and the life that it had.
It was my biggest tree printing challenge so far-although its not the largest piece- that goes to the village Oak- but sycamore is very fine grained and so I needed to work much longer on preparing the wood surface to be printable.
I sanded it for around 10 hours over a few days to make sure all scratches were removed and I had all the fine detail visible. The first day of sanding was at a National Trust location and it then took 4 of us to load it into my van to bring it back to my studio in Grizedale.

I continued working on the surface, and then burned it to create the grooves and lower areas.

Once burned I wire brushed it until all the ash was removed.


Then I sealed the surface with shellac.

Once I had completed the first test print to check everything was ok, the round could be moved up to my studio table. Luckily I can call on the Forestry England staff to help.

I use traditional linseed oil printing ink, which is rolled onto the surface of the wood in thin layers. I lay the paper on top, its 100% cotton and I keep it still with weights. Printing is done by hand with a small bookbinders tool, called a bone folder and I use this as it allows me to press a small area at a time, so that it's physically possible to apply the pressure needed. It's a slow process and each Sycamore Gap print took me 3.5 hours to do. I developed some larger arm and shoulder muscles over the weeks I worked on the 5 prints.



Now that the prints are on display to the public I hope it can be a positive next chapter in the way we feel about the tree and for me, all trees. What I hope the most is that the Sycamore tree stump puts out new shoots and begins to grow again.
If you are interested in purchasing an original print from the tree, or a large Giclee print life size, they are available from the National Trust online shop.
3/9/24
It's been wonderful to hear and see that the tree has indeed started growing again, putting a few leaves and shoots in different places around its base.
The Heartwood Exhibition began on 15th July 2024 with the 5 prints being placed in easily accessible public venues along the length of Hadrians Wall. This incuded Newcastle Central Library, Hexham Abbey, Housesteads, and Carlisle Tourist Infomation Centre. In October they all came together in the Queens Hall gallery 1 in Hexham , and from there they went into The Baltic, Gateshead viewing gallery from November to 2nd March 2025.
22/10/26
This year the Heartwood exhibition has been at Seaton Delavel Hall.
I am now in my new studio in the Old Laundry here at Grizedale, and the Sycamore Gap tree round is here where I am printing the original prints to supply to the National Trust.
9 comments
Wonderful that you were able to print from the tree , will allow people with all those lovely memories to keep alive there memories..
Like some one else said will these be available to purchase, would love one to hang in our house.
Many thanks for sharing your great work .
Steve farr
I have just read the article in the National Trust magazine, about your work with the Sycamore Gap tree. I proposed to my wife under the tree and wondered if you will be selling copies of your prints.
Kind regards.
Hi. Thank you for creating such an incredible legacy of our beautiful Tree. I spent some time with the prints this morning at the QH and felt very moved. I too am very interested to know if you’re planning to make prints avaliable to the public to buy?
Thanks a lot. Annie.
I’m in love with the sycamore gap tree print. Will these be available to the public at all to purchase? Thank you.